ISDT Shop
ISDT E625 6 Channels Lipo Battery Charger Discharger DC USB C Smart Charger for RC Batteries Balance Charger for LiPo/LiHV Batteries
ISDT E625 6 Channels Lipo Battery Charger Discharger DC USB C Smart Charger for RC Batteries Balance Charger for LiPo/LiHV Batteries
受取状況を読み込めませんでした
PRODUCT MANUAL
PRODUCT MANUAL
DELIVERY
DELIVERY
For non-pre-sale products, ISDT processes the order within 2-3 working days after the order was placed, once confirmed, we will ship it according to the order time.
We provide 3 shipping methods:
Shipping Method and Estimated Shipping Time:
Standard Shipping: 15-20 working days
Fast Shipping: 7-15 working days
Expedited Shipping: 3-7 working days
The shipping time should be subject to the time announced by the shipping company. Once the products of your order leave our warehouse, the actual delivery may be affected by events which are beyond our control. Thus, we do not assume any responsibility for any delay in delivery due to unexpected logistics related events.
If any logistics delay occurs, you may send an email to isdt0506@gmail.com, and we will do our best to contact the logistics company to help resolve the issue.
Video
Firmware needs to be updated. The battery typically charged with this charger is small, mostly 260-280-300mah. .5 charge rate is over 1c and therefore will degrade batteries over time. I have multiple PD chargers for usb c. And multiple cables for usb PD charging. This charger will not charge with the PD method. It only triggers 5v and that isn’t enough to activate the charge procedure. Please make updated firmware to properly utilize the PD charging. Also, please add .1a,.2A,.3a,.4a charging amperage, as well as mah counter to see how much each battery accepts for a charge. PLEASE.
As of today there are some (firmware?) bugs which make it unsafe to use. v1.xxx.13
-charging current EXEEDS the set current
-charging current can only be set to: 0.5A 1A 1.5A 2A 2.5A
-current can’t be set for the voltages of 3.4V-3.85V
Result: You will probably burn your <0.5Ah Lipos, maybe also your house.
They need to finish the firmware.
Why cant i change the current when the voltage is set under 4.2v? I had a battery that was 3.2v and I set it to 3.8v, no amps displayed..... and it went full power 2.4 amps. Seriously. Why cant I change the current at ALL voltages? Plus the bluetooth function is broken.
ISDT E625 6 Channels Lipo Battery Charger Discharger DC USB C Smart Charger for RC Batteries Balance Charger for LiPo/LiHV Batteries
Top charger for whoops